Connect the appropriate cable to your clip.

Connect the phone to the cable

Press the "Reset" button

Press the on button on your phone once.

The phone should display "service mode"

Press the on button on your phone once again

Your phone should power on and say insert sim.

Disconnect the cable and check the phone with a foreign sim to see if it is unlocked.
Update Instructions:

To update your clip you will need to download the updater software. This can be found HERE.

Connect your update cable to your pc.

Turn off your clip, and then connect the clip to the update cable

Turn your update cable on. The green LED should be static. (not flashing)

Open the updater software.

Select the file you want to upload. ("Select File")

Press the update ("Update") button.

The software will then display some information such as the flasher version, the clip serial number.

During the flashing process, the green and red leds will flash at different intervals.

Once the flashing process is complete the last command on the software should be "Restarting Clip... OK"

The green led should now be flashing.

You have now successfully updated your clip.
Update Files

Important: V2 Update files must ONLY be used from your clip supplier.If your clip serial number does not fit in the range that the update is forthen do NOT use these files. Contact your supplier for the correctupdate files. Latest updates are marked with red color and with !

Please download ALWAYS the LATEST UPDATE !
V2 Update for Clip SN: 1 to 500

Support for SL55


V2 Update for clip SN: 501 to 1000

Support & minor bugfixes for sl55


V3 update for clip SN: ALL

Support for M55 and MT50


V4 Update for clip SN: ALL
Support for C55 1720 flash and M55 new hardware version

V5 Update for clip SN: ALL
Support for S46

V6 Update for clip SN: ALL
All known bugs fixed. Support for V07 M55

V7 Update for clip SN: ALL
Support for Siemens ST55 and PanasonicGD55 via PC. - Note:
Please read the readme file for instructions on how to use the new update

V8 Update for clip SN: ALL
Support for Nokia DCT4 inc new type7 phones. Support for Maxon, AEG & Vitel.
Support for DCT3 remote unlocking

V9 Update for clip SN: ALL
Bugs on DCT3 & Vitel code calculations fixed